Jul 11, 2013 KODAK ESP 5250 Win Vista and Xp Driver – Download (9.5MB) KODAK ESP 5250 Cloud Printing Windows Software Connector –Download (6.7MB) KODAK ESP 5250 Firmware Windows – Download (36KB) Operating System (s): Mac OS X 10.5.x, Mac OS X 10.6.x, Mac OS X 10.7.x, Mac OS X 10.8.x. KODAK ESP 5250 Mac Driver – Download (79.9MB). Kodak Scanmate i1220 Scanner series Full Driver & Software Package download for Microsoft Windows and MacOS X Operating Systems. Kodak scanner driver is an application software program that works on a computer to communicate with a scanner. Kodak ESP Office 6100 Series Pdf User Manuals. View online or download Kodak ESP Office 6100 Series User Manual. Updating the Software and Printer Firmware. Updating if Your Printer Is Connected to a Computer With MAC OS. Monitoring and Adjusting Printer Performance.
Table of Contents > Networking Your Printer > Connecting to a wireless network2 Networking Your Printer
To connect your printer to an 802.11 wireless (Wi-Fi) network, refer to the following information.
Before you connect
You need:
A computer equipped with a network interface card or wireless networking support.
A working 802.11 wireless network. Kodak recommends that you use a wireless access point/router that uses Dynamic Host Configuration Protocol (DHCP).
To determine whether your wireless router supports Wi-Fi Protected Setup (WPS).
Your network name (SSID - Service Set Identifier). You can obtain your SSID from the wireless access point, most commonly a router, using the router's embedded Web server. See the manufacturer's documentation provided with your wireless system for more information.
IMPORTANT: The SSID is case sensitive. Your Wired Equivalent Privacy (WEP) key or Wi-Fi Protected Access (WPA/WPA2) passphrase.
To temporarily disable your firewall until the printer is successfully installed and communicating. For information, go to www.kodak.com/go/inkjetnetworking.
Using the LCD keyboard
When you need to enter letters or numbers, a keyboard appears on the LCD.
On the printer, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters. Press OK after each character. When you are done, select DONE, then press OK.
To erase a character, select BKSP (backspace), then press OK.
To change from uppercase to lowercase, select abc/123, then press OK.
To change from lowercase to uppercase, select ABC/123, then press OK.
To enter punctuation or symbols, select !@#, then press OK.
Connecting to a wireless network using the WiFi Setup Wizard
You can use the WiFi Setup Wizard on the printer to connect to your wireless network. Read the following procedures and use the one that is appropriate for your network setup.
Connecting to a non-WPS wireless router
To connect to your wireless network, you need to know the network name, which is also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.
If you have enabled security on your network, you also need to know the security string, which may be a Wired Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information, using the correct uppercase and lowercase letters for your WEP key or WPA/WPA2 passphrase.
Press Home.
Press to select Network Settings, then press OK.
With WiFi Setup Wizard selected, press OK.
NOTE: The Wi-Fi radio turns on automatically when you select WiFi Setup Wizard. The printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:
NOTE: If there are more networks than can be shown on the LCD, a (page down) symbol appears in the bottom right of the display. If you don't see your network in the list or want to change your network, select Rescan for Wireless Networks, then press OK. If the name of your network is:
Listed Not listed Press to select your network, then press OK.
Make sure your wireless router is turned on and within range. If your wireless router does not broadcast its SSID (network name):
Press to select Unlisted Network, then press OK.
Use the LCD keyboard to enter your network name. (Using the LCD keyboard)
Select WEP or WPA/WPA2 as required for your network's security setup, then press OK.
If your network requires a password, 'Enter Security String' and a keyboard appear on the LCD. Use the LCD keyboard to enter the security string. (Using the LCD keyboard)
When the confirmation message appears, press OK.
If the printer is successfully connected, the Wi-Fi status light will be on.
If you are unable to connect your printer, go towww.kodak.com/go/inkjetnetworking for more information.
If you haven't yet installed the KODAK All-in-One Printer Software, go to www.kodak.com/go/aiodownloads and follow the on-screen instructions to install the software.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP6100+1133).
Connecting to a WPS wireless router
If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.
To connect to a network using WPS:
Press Home.
Press to select Network Settings, then press OK.
With WiFi Setup Wizard selected, press OK.
NOTE: The Wi-Fi radio turns on automatically when you select WiFi Setup Wizard. With WPS Connect selected, press OK.
Select one of two methods of connecting:
IMPORTANT: Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router device manufacturer's documentation for more information. Pressing a button Entering a PIN NOTE: You will have two minutes to press or select the WPS button. It may be a button on the device or a virtual button in the device's software. With Push Button Configuration selected, press OK.
Press or select the WPS button for your wireless router.
Press to select Generate WPS PIN, then press OK.
In your wireless router's software, locate the PIN screen.
Enter the PIN you received on the LCD into the PIN screen, then follow the router's instructions.
When the confirmation message appears, press OK.
If the printer is successfully connected, the Wi-Fi status light will be on.
If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking for more information.
If you haven't yet installed the KODAK All-in-One Printer Software, go to www.kodak.com/go/aiodownloads and follow the on-screen instructions to install the software.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESP6100+1133).
Setting up an IP address
| IMPORTANT: | You should only need to set up an IP address for your printer if you are having a problem with connecting. Typically, it is not necessary to set up an IP address. This procedure is for advanced users who know how to obtain the IP address for the printer. |
All IP address entries have the following format: 000.000.000.000. Within each three-digit grouping, the number must be right-justified. If an address or subnet mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:
The address as it may appear in your documentation | How to enter the address in the printer menu |
149.89.138.149 | 149.089.138.149 |
149.2.40.149 | 149.002.040.149 |
For information about obtaining the printer IP address, go to www.kodak.com/go/inkjetnetworking.
To set up your IP address on the printer:
Press Home.
Press to select Network Settings, then press OK.
Press to select Advanced IP Address Setup, then press OK.
Press OK again to continue.
Select one of the following, then press OK:
Dynamic (DHCP)
Automatic (Private)
Manual (Static)
If you selected Manual (Static), you are prompted to enter an IP address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet service provider or network administrator for more information.
Viewing the network configuration
To view the network configuration and verify that you are connected to your wireless network:
Press Home.
Press to select Network Settings, then press OK.
Press to select View Network Configuration, then press OK.
The wireless or Ethernet network settings appear on the LCD, including:
Printer Hostname
Connection
Speed
IP Address
IP Address Type
Network Subnet
Connected Network SSID
Security
Authentication
Channel
Region
Radio (on/off)
MAC Address
If the printer is connected to your network, you will see the network name and the word CONNECTED.
To scroll through the information, press .
When you are done, press OK.
Printing the network configuration
To print the current network configuration:
Kodak Esp 6100 Software For Mac Pro
Load plain paper into the printer. (See Loading plain paper.)
Press Home.
Press to select Network Settings, then press OK.
Press to select Print Network Configuration, then press OK.
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK All-in-One Printer Software on each computer. Go to www.kodak.com/go/aiodownloads and follow the on-screen instructions.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you have an ESP 7 printer and now you are adding an ESP Office 6150 printer), you must install the software for the newer model.
If you are connecting to another ESP Office 6150 printer or to a previous model:
On a computer with WINDOWS OS:
Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
If your wireless all-in-one printer (example: KodakESP6100+1133) is not listed:
Select No, my printer is not listed, then click Next.
From the drop-down list, select your printer.
Select Network - Wireless[thinsp]/[thinsp]WiFi, then click Next. When your printer is detected, driver installation begins.
If your wireless all-in-one printer (example: KodakESP6100+1133) is listed:
Highlight the all-in-one printer that is connected to your network.
Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.
When driver installation is complete, click Done.
On a computer with MAC OS:
Select Apple > System Preferences.
Under Hardware, select Print & Fax.
In the Print & Fax dialog box, click +.
Select your printer from the list, then click Add.
PreviousNext
KODAK ESP Office 2150 All-in-One Printer series Full Driver & Software Package download for Microsoft Windows and MacOS X Operating Systems.
Kodak printer driver is an application software program that works on a computer to communicate with a printer. When a print command from a computer is sent to the printer, “Printer Driver” acts like an intermediary and converts information from this program into a language format that can be understood by the printer and operating system that is used on certain computers such as Windows XP, 7, Windows 10. This is important enough to use suitable drivers to avoid problems when printing.
“www.olbig.com” ~ Easily find and as well as downloadable the latest drivers and software, firmware and manuals for all your printer device from our website.
With high print speeds of up to 6 HDI (black) and up to 4 HDI (colors), Kodak ESP office 2150 is able to meet the demands of your growing business. The Kodak inkjet printer, with 1200×1200 dpi (black) and up to 4800 dpi (color) resolution, prints with extraordinary colors, finishes and image quality. The integrated memory card slot in this all-in-one Kodak ESP 2150 printer lets you easily transfer images from PCs, cameras and other devices. Connect the device to this Kodak inkjet printer wirelessly, thanks to built-in wireless connectivity. This ENERGY STAR-qualified Kodak ESP office 2150 all-in-one printer consumes 30-75 percent less electricity than standard alternatives, promising significant energy savings.
KODAK ESP Office 2150 Printer Manual or Extended User Guide in PDF format – here.
KODAK ESP Office 2150 Driver for Windows
OS Compatibility :
- Microsoft Windows 10
- Microsoft Windows 8.1
- Microsoft Windows 8
- Microsoft Windows 7
- Microsoft Windows Vista
KODAK All-in-One Printer Home Center Software (including drivers) | ||
| File Version | 8.0 | Download |
| File Size | 10 megabytes | |
| File Name | ||
| Release date | November 17, 2017 | |
| Compatibility | WINDOWS 10, WINDOWS 8.1 | |
| File Version | 7.9 | Download |
| File Size | 10 megabytes | |
| File Name | ||
| Release date | Juny 23, 2016 | |
| Compatibility | WINDOWS 8, WINDOWS 7, WINDOWS XP, WINDOWS VISTA | |
| Description | With the software version, you can easily download the PrintProjects software, which will help you design, print, and share photo cards, calendars, books, and more. With PrintProjects software, you can print at home or have your creation sent to you. | |
KODAK Printer Firmware Update Tool | ||
| File Version | 3.4 | Download |
| File Size | 36 kilobytes | |
| File Name | ||
| Release date | April 26, 2012 | |
| Compatibility | Windows | |
| Description | The firmware version optimizes printer settings for improved printing, scanning and copying performance. | |
KODAK ESP Office 2150 Driver for MacOS X
OS Compatibility :
- macOS 10.14
- macOS 10.13
- macOS 10.12
- macOS 10.11
- macOS 10.10
- macOS 10.9
- macOS 10.8
- macOS 10.7
Recommended Printer driver & software for Mac OS X | ||
| File Version | 7.9 | Download |
| File Size | 83.4 megabytes | |
| File Name | ||
| Release date | Desember 22, 2015 | |
| Compatibility | MAC OS X 10.11.x, MAC OS X 10.10.x, MAC OS X 10.9.x, MAC OS X 10.8.x | |
| File Version | 7.7 | Download |
| File Size | 79.9 megabytes | |
| File Name | ||
| Release date | Desember 03, 2012 | |
| Compatibility | MAC OS X 10.7.x, MAC OS X 10.6.x, MAC OS X 10.5.x | |
| Description | With the software version, you can easily download the PrintProjects software, which will help you design, print, and share photo cards, calendars, books, and more. With PrintProjects software, you can print at home or have your creation sent to you. | |
Kodak Esp 7250
KODAK ESP All-in-One Printer Firmware | ||
| File Version | 3.4 | Download |
| File Size | 10 megabytes | |
| File Name | ||
| Release date | April 26, 2012 | |
| Compatibility | MacOS X | |
| Description | Firmware is software that runs on a printer, scanner, or other product and controls the functions and user interface. | |
When we attach a USB cable to an Kodak esp printer, the computer will try to recognize it and if it has a suitable driver, it can do an automatic installation and print. If the computer does not recognize the printer, we need to install the driver. The new printer is equipped with a CD that contains a Printer driver for a different operating system, which allows us to install manually.
How to installing KODAK ESP 2150 driver
Kodak Esp 7250 Installation Software
- Double-click the downloaded file.
- if [User Account Control] is displayed, click Yes.
The folder is created and then the file is decompressed. - [Select Language] is displayed; Select your language and then click OK.
- [License window] is displayed; click “I Agree” if you accept the user license agreement.
- Launch of the installer; follow the steps in the window to install the software.
If the printer driver version is installed, [Do you want to save the existing driver or use a new one?] Shown. Follow the steps to install the new version of the driver. And ordered to restart the OS before installing it. - If [Program Compatibility Assistant] is displayed, click [This program is installed correctly].